产品描述
产品信息
FlexIO-S Digital装置能够将CAN总线上的数据转换为数字信号，用以实现状态显示或切换外围组件。同时能够将数字输入通过FlexIO-S Digital导入，在CAN总线上再次生成并发送信号。为此硬件配备了一个CAN接口以及8个高边通道和8个低边通道，均可独立配置为输入端或输出端。
产品优势
- 可脱离PC连接独立运行
- 可根据CAN信号开/关负载
- 8 个高边频道和 8个低边频道均可配置为输入或输出端口
FlexIO-S Digital
CAN Digital IO Unit
型号: 70006450
FlexIO-S Digital装置能够将CAN总线上的数据转换为数字信号，用以实现状态显示或切换外围组件。同时能够将数字输入通过FlexIO-S Digital导入，在CAN总线上再次生成并发送信号。为此硬件配备了一个CAN接口以及8个高边通道和8个低边通道，均可分别配置为输入端或输出端。
- 产品描述
- 技术参数
- 下载
技术参数
FlexIO-S Digital
供电电压
6 – 36 V
运行温度
-40°C 至 +85°C
输入和输出
8个高边(每个最大为1A) /
8个低边 (每个最大为1A)
8个低边 (每个最大为1A)
接口
1个高速 CAN（可选: LIN 1.3/2.x）
LED状态灯
每个输入和输出口配有一个
警告蜂鸣器
高边输出8可选装
配置
USB 2.0
尺寸
90 x 85 x 35 mm
下载
附件
可持续性
Creating values and living values. This is what STAR COOPERATION unites. Because we know: Only if we pursue ecological and social concerns in a credible and sustainable manner can we guarantee long-term sustainable growth and economic success - for ourselves and our customers.
能源技术
More and more Electrification In Vehicles. The electrification of vehicles and power engine systems increasingly demands electrical and electronical high-performance components when it comes to energy density, transferable current strength and intelligent charge management.
网络技术
Vehicle networking is an increasingly important issue. For, more and more components within a vehicle are interconnected.
车间服务商
You would like to have a high-tech workshop as an extended work bench to optimize your vehicles? At STAR, you get all workshop services for vehicles in a fast, precise and cost-efficient manner from one source.
EMS 电子制造服务
We supply you with assembled boards according to your requirements. Our Electronic Manufacturing Services (EMS) range from PCB assembly to customer-individualized device production including installation and customizing of individual casings to complete tool building.
测试系统
汽车技术中每一个更复杂的系统都需要更智能的生产和测试技术。我司通过采用多种电子测试和评估系统来开发组件并将其集成到车辆中。
传感器/执行器技术
From measuring to controlling, from sensor to actuator. New efficiency in measuring and control technology.
残余总线仿真
Providing a network enviroment fpr control unit development. Because of the increasing complexity in vehicles and, thereby, vehicle networks, remaining bus simulation becomes ever more important.
信号发生器
Applied pulse with modulation and pulse wave generation. Due to the constant extension of electronics in vehicle more and more signals have to be measured and functions have to be operated.
电子线束生产
We produce wiring harnesses according to your specification: from special productions to cable set manufacturing for experimental and test set-ups to small batch assembly, we guarantee always speedy production.
FlexMeasure-L
此内联测量适配器是FlexMeasure-S（E812）的备选产品。 测量值输出通过CAN总线进行数字化。 随附的DBC文件允许快速，简单地集成到新的和现有的测量系统中。 为确保高压安全，高压和低压电路均已电隔离。
FlexSupply-S
FlexSupply-S是专为车辆测试提供测量技术而设计的产品。能够有效弥补测量技术组件或启动进程所需超长线路造成的电源压降。
FlexSupply-M
FlexSupply-M旨在在车辆的维修和保养工作中为车载网络供电。 它包含一个充电器，一个汽车电池和各种电子组件。
FlexMeasure-S
FlexMeasure-S装置坚固耐用且专为测量乘用车高压线路的电流而开发的产品。由于有多个连接方案可供选择，FlexMeasure-S可以集成到现有60A电路中。
FlexIO-S Digital
FlexIO-S Digital装置能够将CAN总线上的数据转换为数字信号，用以实现状态显示或切换外围组件。同时能够将数字输入通过FlexIO-S Digital导入，在CAN总线上再次生成并发送信号。为此硬件配备了一个CAN接口以及8个高边通道和8个低边通道，均可分别配置为输入端或输出端。
FlexIO-S Analog
FlexIO-S Analog模拟测量模块主要用于测量电压并将测量值发送到CAN总线。 此外，FlexIO-S Analog模拟测量模块也可以生成高达±10 的V电压并为传感器供电。
FlexIO-M Thermo
热敏元件测量模块FlexIO-M Thermo采用评估8个K型热敏元件的方式完成电流分离的温度测量，并且可以通过CAN接口循环导出测量值。
FlexInterlock-M
FlexInterlock-M模块适用于测试台架，可根据生成和评估高压互锁信号仿真高压电池高压互锁功能。几个冗余开关触点和LED用于显示高压互锁是否被检测到。
FlexGen-S Sensor
FlexGen-S 传感器构造简便灵活，能够解决各类传感器/执行器的技术任务。传感器通常需要配备一套用于数据处理，供应及可视化的控制装置。
FlexGen-S PWM
FlexGen-S PWM是PWM发生器，其中PWM信号由集电极开路输出产生。 因此，该单元生成用于测试台和测试车辆的PWM信号，或者在汽车风扇和泵的控制输入上生成速度预设值。 频率和信号比可以通过旋转编码器单独调节。
FlexGen-M PWM Remote
FlexGen-M PWM用于生成输出电流达10 A的可变PWM信号。频率，脉冲占空比以及设置和控制参数可以通过自动化系统的CAN接口定义。 电流值可以通过传感器输入和集成电流测量值回读。
FlexGen-M PWM
FlexGen-M PWM用于生成输出电流达10 A的可变PWM信号。 频率和脉冲占空比均使用具有粗调和精调功能的旋钮进行设置。
FlexGen-M SENT
FlexGen-M SENT是一个可灵活使用并且可移动的自给型研发平台，能够提供收集，处理和生成传感器数据的综合方案，使用该产品后既可以读取实际连接的SENT传感器信号，也可以模拟出虚拟传感器。通过触发按钮可以实现用不同的函数进行信号操纵，并以此对本设备连接的控制单元针对性地测试已定义的故障状况或在达到阈值时的运行情况。
FlexMedia 1000BASE-T1
FlexMedia 1000BASE-T1是1000BASE-T1和1000BASE-TX的双向转换器。FlexMedia 1000BASE-T1可以实现将汽车以太网连接到电脑上进行检测或诊断。
FlexMedia 100BASE-T1
FlexMedia 100BASE-T1是100BASE-T1和100BASE-TX的双向转换器。FlexMedia 100BASE-T1可以实现将汽车以太网连接到电脑上进行检测或诊断。
Development Board FlexDevel
FlexDevel是适合汽车总线系统初学者的低成本解决方案，由配备FlexRay、CAN、LIN和以太网接口的通用微控制器开发平台组成。
FlexSwitch 1000BASE-T1
FlexSwitch1000BASE-T1是市场上首批1000BAE-T1交换机之一，因为其使用特殊的筛选机制而备受好评。交换机每个端口可以定义相应用于阻挡该端口通信的条件。
FlexOpto
FlexOpto是一个双向媒体转换器，可通过光纤传输FlexRay，CAN或LIN信号。
FlexCard PMC-II
FlexCard PMC-II装置是PMC设计中用于汽车总线系统的总线接口。 8个总线接口可以通过物理层（FlexTiny II）插槽配置不同的总线系统。
FlexCard PXIe3
FlexCard PCIe3装置将实时剩余总线模拟或网关以及汽车总线系统的7-30通道*测量接口的高性能平台能够进行综合在一台装置中。
FlexCard PCIe3
FlexCard PXIe3装置将实时剩余总线模拟或网关以及汽车总线系统的7-30通道*测量接口的高性能平台能够进行综合在一台装置中。
FlexDevice-S
多功能总线控制装置FlexDevice-S配备一个变量接口，能够支持当前和即将上市的总线系统，满足需配置总线接口的大多数应用领域的使用需求。
FlexDevice-L
多功能总线控制装置FlexDevice-L配备多个变量接口，能够支持当前和即将上市的总线系统，满足需配置总线接口的大多数应用领域的使用需求。
FlexDevice-L²
多功能总线控制装置FlexDevice- L2配备多个变量接口，能够支持当前和即将上市的总线系统，满足需配置总线接口的大多数应用领域的使用需求。
联系我们
Take advantage of our expert knowledge in the STAR fields of MEDIA, LOGISTICS, CONSULTING, IT, ENGINEERING and ELECTRONICS - and benefit from sophisticated solutions. Everything from a single source and perfectly matched to your company.
FlexConfig Analyzer
FlexConfig分析仪软件可在智能手机或平板电脑上可视化CAN，LIN或FlexRay数据。 为此，可以通过蓝牙或Wi-Fi与适配的总线接口如FlexDevice-S / L / L² 或者 FlexCard Air-S建立无线连接。
FlexConfig Developer
FlexConfig Developer是一款经济实惠，功能强大且易于使用的汽车网络设计配置软件。
FlexConfig RBS
FlexConfig RBS是生成和配置残余总线仿真和网关，用以辅助硬件的软件产品，能够支持多种网络通信格式。生成的RBS软件能够在单独硬件上独立运行。
服务
Whether PCB assembly, vehicle construction and modification or contract development and engineering services – our workshop and manufacturing facilities offer quick and flexible options for your development requirements.
Services
Whether PCB assembly, vehicle construction and modification or contract development and engineering services – our workshop and manufacturing facilities offer quick and flexible options for your development requirements.
电子设备
Autonomous driving, intelligent driver assistance systems or efficient car charging stations. Our experts offer suitable tools, innovative tech and sophisticated services. Discover more!
Glossary
This glossary is meant to enable you to gain a basic understanding of the most important terminology for FlexRay and automotive bus systems.
Driver
Here you find the driver packages of the STAR ELEKTRONIK devices for download in their current version.
数字化
Master your digital future with STAR. Make a lasting difference for tomorrow. – across all sectors Discover more!
售后服务
Any company wanting to have long-term success in the market needs a professional After Sales service. Our experts are here to answer your questions
职业生涯
Do you believe that you can achieve every goal with expertise and passion? So do we! Become a STAR - and benefit from a top employer who goes with you into the future. Here you will find our current vacancies and everything you need to know about your career at STAR COOPERATION.
虚位以待
Find jobs at STAR that combine skill with passion and genuine recognition. We offer you a network that will help you get ahead. Teams in which you score with your ideas and skills. And exciting tasks in global projects. Join us into the future - here you will find current job vacancies!
培训项目
We provide various kinds of training programs to make our employees more adaptive, more competitive and more creative, so that we can grow up and develop together. It could be internal or external training, could be on-job or off-job training, could also be local or oversea training. It just depends on, what we do need. We offer more than jobs.
加入我们
Develop your career with us: Discover STAR as your new top employer. With STAR, you enjoy attractive benefits and an environment with plenty of room for your ideas. With us, you will enter a successful future. And live the STAR SPIRIT. Find out more now!
驱动
Here you find the driver packages of the STAR ELEKTRONIK devices for download in their current version.
产品证书
使用施达电子软件的一般条款和条件
术语表
术语表可以帮您能够初步理解Flex Ray和汽车总线系统的相关重要术语
支持
Our support team will be happy to assist you with any questions you may have regarding the application of our STAR ELECTRONICS hardware and software products.
公司信息
We use our interdisciplinary network of expertise to create unique system solutions. At STAR COOPERATION, our experts work in interdisciplinary teams. And every one of the them focuses on the challenges and needs of our clients. Learn more about us - see us now!
总线网关和总线操作
We offer solutions both for integrating ECUs of various integration levels into an existing vehicle and for manipulating the data transfer to and from an ECU.
总线可视化
Analyzing bus data has never been so user-friendly. With our Can Bus Analyzer software, you can quickly and easily view CAN, LIN or FlexRay data on a smartphone or tablet.
应用范例
Application examples for products from STAR ENGINEERING & CONSULTING (Shanghai)
总线接口
With STAR COOPERATION’s bus interfaces, you can connect PCs with automotive bus systems and record the data traffic. You gain transparency and overview with these efficient solutions for measuring, recording and analysis of FlexRay, CAN, Ethernet and LIN networks.
传感器和执行器技术
Precise measurement of signals and targeted control of functions – with sophisticated measurement and simulation technology for actuators and sensors.
能源技术
Supply, measure, manage: benefit from measurement technology, test and trial setups, and charge management for e-mobility. So you can test your vehicles safely.
软件
Create gateway configurations or restbus simulations quickly, easily and even automatically – with the right software from the FlexConfig family.
硬件
Enjoy the benefits of sophisticated hardware for complex vehicle electronics – developed for your individual requirements. For realistic restbus simulations, gateways, signal manipulation and more.
项目管理
Today, most car producers will devote themselves to the development of multiple vehicle types and a great quantity of derivative product series at the same time. In addition, international cooperation platforms have been widely applied to R&D and production.
产品
We offer you perfectly matched product families. Whether hardware or software, here you will find standard and individual tools for measurement and simulation technology, control technology as well as energy supply and energy management.
网络技术
Gateways, restbus simulations, signal manipulation, data logging and rapid prototyping: test networked vehicle components with intelligent measurement and simulation technology.
汽车咨询
销售人员只是售出了一辆车，而维修人员却能售出“第二辆”。售后服务业务是一个巨大的领域，通过售后服务在各方面打造良好的品牌形象，将有助于提高客户的忠诚度，从而增加长期利润。
电子设备
State-of-the-art technology for E/E systems: benefit from the expertise of the STARS in the field of ELECTRONICS.
主页
Excellence, combined with innovative ideas, specialist expertise and a great deal of passion: that is STAR COOPERATION. We pool our strengths, think outside the box and develop sophisticated concepts and products to bring you success. Discover more!
车辆工程
The pressing demand for environmental friendly automotive technology, combined with features like state-of-the-art driver assistance, multi-media & internet capabilities etc., leads worldwide to an increased amount of specialists needed during the development process of a car.
Data Protection Policy
Below we would like to inform you about our privacy policy. Here you will find information about the collection and use of personal data when using our website. We observe the data protection law applicable in Germany.
FlexMeasure-L
The inline measuring adapter was developed as an alternative to the FlexMeasure-S (E812). The measuring value output is digital via a CAN bus. The included DBC file allows for quick and simple integration into new and existing measuring systems. To ensure HV safety, the HV and LV circuits are galvanically isolated.
Job vacancies
Find jobs at STAR that combine skill with passion and genuine recognition. We offer you a network that will help you get ahead. Teams in which you score with your ideas and skills. And exciting tasks in global projects. Join us into the future - here you will find current job vacancies!
FlexCard PCIe3
The FlexCard PCIe3 combines a high-performance platform for real-time capable remaining bus simulations or gateways and a 7-30 channel* measuring interface for automotive bus systems in one device.
FlexCard PXIe3
The FlexCard PXIe3 combines a high-performance platform for real-time capable remaining bus simulations or gateways and a 7-30 channel* measuring interface for automotive bus systems in one device.
FlexSwitch 1000BASE-T1
FlexSwitch1000BASE-T1 is one of the first 1000BAE-T1 switches on the market and can also score with special filter mechanisms. For each port of the switch, criteria can be defined that allow blocking of certain traffic on that port.
Sensor & actuator technology
Precise measurement of signals and targeted control of functions – with sophisticated measurement and simulation technology for actuators and sensors.
Networking technology
Gateways, restbus simulations, signal manipulation, data logging and rapid prototyping: test networked vehicle components with intelligent measurement and simulation technology.
Electronics
State-of-the-art technology for E/E systems: benefit from the expertise of the STARS in the field of ELECTRONICS.
Contact
Take advantage of our expert knowledge in the STAR fields of MEDIA, LOGISTICS, CONSULTING, IT, ENGINEERING and ELECTRONICS - and benefit from sophisticated solutions. Everything from a single source and perfectly matched to your company.
Training programs
We provide various kinds of training programs to make our employees more adaptive, more competitive and more creative, so that we can grow up and develop together. It could be internal or external training, could be on-job or off-job training, could also be local or oversea training. It just depends on, what we do need. We offer more than jobs.
Career
Do you believe that you can achieve every goal with expertise and passion? So do we! Become a STAR - and benefit from a top employer who goes with you into the future. Here you will find our current vacancies and everything you need to know about your career at STAR COOPERATION.
Project Management
Today, most car producers will devote themselves to the development of multiple vehicle types and a great quantity of derivative product series at the same time. In addition, international cooperation platforms have been widely applied to R&D and production.
Engineering
The pressing demand for environmental friendly automotive technology, combined with features like state-of-the-art driver assistance, multi-media & internet capabilities etc., leads worldwide to an increased amount of specialists needed during the development process of a car.
Consulting
The first car is sold by sales employee, the second by the service worker. The After-Sales business is a huge area that can help to increase customer loyalty by building up a positive brand image in aspects of After-Sales services and thereby increase long-term profits.
Company
We use our interdisciplinary network of expertise to create unique system solutions. At STAR COOPERATION, our experts work in interdisciplinary teams. And every one of the them focuses on the challenges and needs of our clients. Learn more about us - see us now!
Support
Our support team will be happy to assist you with any questions you may have regarding the application of our STAR ELECTRONICS hardware and software products.
Product licenses
General terms and conditions for the use of STAR ELERTONICS software
Join us
Develop your career with us: Discover STAR as your new top employer. With STAR, you enjoy attractive benefits and an environment with plenty of room for your ideas. With us, you will enter a successful future. And live the STAR SPIRIT. Find out more now!
Sustainability
Creating values and living values. This is what STAR COOPERATION unites. Because we know: Only if we pursue ecological and social concerns in a credible and sustainable manner can we guarantee long-term sustainable growth and economic success - for ourselves and our customers.
Digitalization
Master your digital future with STAR. Make a lasting difference for tomorrow. – across all sectors Discover more!
Vehicle electronics
Autonomous driving, intelligent driver assistance systems or efficient car charging stations. Our experts offer suitable tools, innovative tech and sophisticated services. Discover more!
After Sales
Any company wanting to have long-term success in the market needs a professional After Sales service. Our experts are here to answer your questions
Home
Excellence, combined with innovative ideas, specialist expertise and a great deal of passion: that is STAR COOPERATION. We pool our strengths, think outside the box and develop sophisticated concepts and products to bring you success. Discover more!
FlexMedia 1000BASE-T1
The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa. With the FlexMedia 100BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.
FlexMedia 100BASE-T1
The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa. With the FlexMedia 100BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.
Energy technology
Supply, measure, manage: benefit from measurement technology, test and trial setups, and charge management for e-mobility. So you can test your vehicles safely.
Software
Create gateway configurations or restbus simulations quickly, easily and even automatically – with the right software from the FlexConfig family.
Hardware
Enjoy the benefits of sophisticated hardware for complex vehicle electronics – developed for your individual requirements. For realistic restbus simulations, gateways, signal manipulation and more.
Products
We offer you perfectly matched product families. Whether hardware or software, here you will find standard and individual tools for measurement and simulation technology, control technology as well as energy supply and energy management.
Bus interfaces
With STAR COOPERATION’s bus interfaces, you can connect PCs with automotive bus systems and record the data traffic. You gain transparency and overview with these efficient solutions for measuring, recording and analysis of FlexRay, CAN, Ethernet and LIN networks.
Restbus simulation
Providing a network enviroment fpr control unit development. Because of the increasing complexity in vehicles and, thereby, vehicle networks, remaining bus simulation becomes ever more important.
Application examples
Application examples for products from STAR ENGINEERING & CONSULTING (Shanghai)
Signal Generators
Applied pulse with modulation and pulse wave generation. Due to the constant extension of electronics in vehicle more and more signals have to be measured and functions have to be operated.
Bus Visualization
Analyzing bus data has never been so user-friendly. With our Can Bus Analyzer software, you can quickly and easily view CAN, LIN or FlexRay data on a smartphone or tablet.
Bus gateways & bus manipulation
We offer solutions both for integrating ECUs of various integration levels into an existing vehicle and for manipulating the data transfer to and from an ECU.
FlexGen-M PWM Remote
The FlexGen-M PWM remote can be used to generate variable PWM signals with output currents of up to 10 A. The frequency, the pulse duty factor as well as the setting and control parameters can be determined via a CAN interface through an automation system. The current values can be read back through a sensor input and the integrated current measurement.
FlexInterlock-M
FlexInterlock-M Is a module for the use in test benches which emulates an HV interlock‘s functionality according to an HV battery by generating and evaluating an HV interlock signal. Several redundant switch contacts and LEDs are provided to signalize whether the HV interlock was or was not detected.
FlexGen-S Sensor
The FlexGen-S SENSOR is constructed flexibly in order to solve varying sensor/actuator technology tasks. Usually, sensors need a control unit for visualizing, processing and supplying.
FlexGen-M SENT
This is a versatile, mobile, autonomous platform with which sensor data can be recorded, processed and generated. The FlexGen-M Sent reads out connected SENT sensors and simulates virtual sensors. The unit also provides various signal manipulation functions, such as to test the limit value behavior of specific connected control units
FlexIO-S Analog
The FlexIO-S Analog measures voltages up to ±60 V and transmits the values on a CAN bus. Voltages of up to ±10 V can also be simulated to power sensors.
FlexIO-S Digital
With FlexIO-S Digital , data on a CAN bus can be converted into digital signals for status display or to switch external peripherals. Additionally, digital inputs can be read-in and their signals mapped and transmitted on the CAN bus. For the purpose, the hardware features a CAN interface as well as eight high-side and eight low-side channels which can be individually configured optionally as inputs or outputs.
FlexIO-M Thermo
The FlexIO-M Thermo is likewise a thermocouple measuring module for electrically isolated temperature measurement. This variant offers eight type K thermocouple connections.
Development Board FlexDevel
The FlexDevel is a low cost solution for beginners in automotive bus systems. It consists of a universal micro controller development platform with FlexRay, CAN, LIN and Ethernet interfaces.
FlexOpto
FlexOpto is a bidirectional media converter which transmits electrical FlexRay, CAN or LIN signals via optical fibre.
Networking technology
Vehicle networking is an increasingly important issue. For, more and more components within a vehicle are interconnected.
Energy technology
More and more Electrification In Vehicles. The electrification of vehicles and power engine systems increasingly demands electrical and electronical high-performance components when it comes to energy density, transferable current strength and intelligent charge management.
FlexMeasure-S
The robust FlexMeasure-S was developed especially for measuring currents in high-voltage line in passenger vehicles. Due to the flexible connecting options, the ISI current inline can be integrated in existing circuits of up to 60A without problems.
FlexGen-M PWM
The FlexGen-M PWM is used to generate variable PWM signals with output currents up to 10 A. The frequency and pulse duty factor are both adjusted via a rotary encoder with a rough and fine function.
FlexSupply-M
FlexSupply-M was designed for supporting on-board networks during repair and service work on vehicles. It contains a charger, a car battery and various electronics components.
EMS | Electronic manufacturing services
We supply you with assembled boards according to your requirements. Our Electronic Manufacturing Services (EMS) range from PCB assembly to customer-individualized device production including installation and customizing of individual casings to complete tool building.
Workshop service provider
You would like to have a high-tech workshop as an extended work bench to optimize your vehicles? At STAR, you get all workshop services for vehicles in a fast, precise and cost-efficient manner from one source.
FlexSupply-S
The FlexSupply-S was designed especially for supplying measurement technology in test vehicles. Supply voltages drops caused by e.g. overlong lines to measurement technology components or the start-up process are effectively compensated.
Sensor/actuator technology
From measuring to controlling, from sensor to actuator. New efficiency in measuring and control technology.
Testing systems
Every more complex systems in automotive technology require more intelligent production and testing technologies. Companies resort to a multitude of electronic test and evaluation systems for developing and integrating components into the vehicle.
Wiring harness production
We produce wiring harnesses according to your specification: from special productions to cable set manufacturing for experimental and test set-ups to small batch assembly, we guarantee always speedy production.
FlexGen-S PWM
The FlexGen-S PWM is a PWM generator in which the PWM signal is generated by an open-collector output stage. This unit thus generates PWM signals for test benches and test vehicles, or speed presets on control inputs of automotive fans and pumps. The frequency and signal ratio can be individually adjusted by a rotary encoder.
FlexCard PMC-II
The FlexCard PMC-II is a bus interface device for automotive bus systems in PMC design. The card's 8 bus interfaces can be configured for different bus systems via Physical Layer (FlexTiny II) slots.
FlexDevice-L
The multifunctional bus control unit FlexDevice-L supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.
FlexDevice-L²
The multifunctional bus control unit FlexDevice-L² supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.
FlexDevice-S
The multifunctional bus control unit FlexDevice-S supports the current and upcoming bus systems and has one variable interface, so it covers most of the application fields where bus interfaces are required.
FlexConfig RBS
FlexConfig RBS is a software to generate a hardware assisted RBS and Gateways. Several network description formats are supported. The generated RBS runs independently on a separate hardware.
FlexConfig Developer
FlexConfig Developer is a cost-effective, powerful and user-friendly design and configuration software for automotive networks.
FlexConfig Analyzer
The FlexConfig Analyzer is an application for Android based devices for monitoring CAN, LIN and FlexRay buses. FlexConfig Analyzer is therefore the perfect complement to the WLAN and Bluetooth-enabled bus interface cards such as the FlexDevice-S / L / L² or the FlexCard Air-S.
