yafu - Yet Another FlexUpdate

The user has to

• Select the hardware
• Select the image from the firmware file
• Select the target index in flexcard
• Choose if the written image should be activated

$ sudo yafu -file=./firmware/FlexCard_PMCII_S6V5.fwf
Selected hardware is <>
Selected file is </home/ebel/firmware/FlexCard_PMCII_S6V5.fwf>
Select hardware to update
   1 - FlexCard PMCII 30000001610004
Enter index of a hardware. 0 for abort: 1

Hardware is FlexCard PMCII 30000001610004
Valid images in the firmware file:
   1 - FlexCard PMCII - 6.5.0.0 - Can:0 FlexRay:4
   2 - FlexCard PMCII - 6.5.0.0 - Can:2 FlexRay:3
   3 - FlexCard PMCII - 6.5.0.0 - Can:4 FlexRay:2
   4 - FlexCard PMCII - 6.5.0.0 - Can:6 FlexRay:1
   5 - FlexCard PMCII - 6.5.0.0 - Can:8 FlexRay:0
Enter index of an image to use. 0 for abort: 4
Selected image: FlexCard PMCII - 6.5.0.0 - Can:6 FlexRay:1
   index:1 active:0 Flexray:1 CAN:6 LIN:0 MOST:0 FlexRaySelfSync:1 FirmwareVersion:06.04.00.00
   index:2 active:0 Flexray:2 CAN:4 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:3 active:0 Flexray:3 CAN:2 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:4 active:0 Flexray:4 CAN:0 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:5 active:0 Flexray:0 CAN:8 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:6 active:0 Flexray:0 CAN:8 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:05.03.00.00
   index:7 active:0 Flexray:1 CAN:6 LIN:0 MOST:0 FlexRaySelfSync:1 FirmwareVersion:06.05.00.00
-> index:8 active:1 Flexray:1 CAN:6 LIN:0 MOST:0 FlexRaySelfSync:1 FirmwareVersion:06.05.00.00 <-
Enter index of an application image to update (1..8). 0 for abort: 7
Selected application image: 7

write.

Step 1 of 3: Reset firmware - This operation could take a few minutes.

Step 2 of 3: Write firmware - This operation could take a few minutes.
----------------------------------------------------------------------------------------------------
Step 3 of 3: Check firmware - This operation could take a few minutes.
-----------------------------------------------------------------------------------------------------
Firmware update of slot 7 successfully completed.

Writing/deleting/activating further target slots on the FlexCard PMC II is possible without a computer shut down, but the changes will only take effect after a complete computer shutdown. (A restart is not sufficient.)

If you want to use this image, you need to activate it in the tab 'Firmware Image List'.
Activate Image? [y/n]: y

(process:13878): libflexcard-WARNING **: fcbFWSelectImage has been called. PLEASE POWEROFF AND RESTART
Successful activated image.

Hint: The hardware does not need to be chosen because the serial number is part of the license file

$ sudo yafu -file=/home/ebel/license/before_test.lic
Selected hardware is <>
Selected file is </home/ebel/license/before_test.lic>


Start to update license...

Successfully updated license.

$ sudo yafu -file=/tmp/test.lic
Selected hardware is <>
Selected file is </tmp/test.lic>
Read license from flexcard and save to file.
Select hardware to update
   1 - FlexCard PMCII 30000001610004
Enter index of a hardware. 0 for abort: 1

Hardware is FlexCard PMCII 30000001610004

Successfully wrote license to file.

$ sudo yafu -selectOnly
Selected hardware is <>
Selected file is <>
Select hardware to update
   1 - FlexCard PMCII 30000001610004
Enter index of a hardware. 0 for abort: 1

Hardware is FlexCard PMCII 30000001610004
   index:1 active:0 Flexray:1 CAN:6 LIN:0 MOST:0 FlexRaySelfSync:1 FirmwareVersion:06.04.00.00
   index:2 active:0 Flexray:2 CAN:4 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:3 active:0 Flexray:1 CAN:6 LIN:0 MOST:0 FlexRaySelfSync:1 FirmwareVersion:06.05.00.00
   index:4 active:0 Flexray:4 CAN:0 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:5 active:0 Flexray:0 CAN:8 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:6 active:0 Flexray:15 CAN:15 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:255.255.255.00
   index:7 active:0 Flexray:15 CAN:15 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:255.255.255.00
-> index:8 active:1 Flexray:1 CAN:6 LIN:0 MOST:0 FlexRaySelfSync:1 FirmwareVersion:06.05.00.00 <-
Enter index of an application image (1..8). 0 for abort: 5
Selected application image: 5

(process:22412): libflexcard-WARNING **: fcbFWSelectImage has been called. PLEASE POWEROFF AND RESTART

$ sudo yafu -deleteOnly
Selected hardware is <>
Selected file is <>
Select hardware to update
   1 - FlexCard PMCII 30000001610004
Enter index of a hardware. 0 for abort: 1

Hardware is FlexCard PMCII 30000001610004
   index:1 active:0 Flexray:1 CAN:6 LIN:0 MOST:0 FlexRaySelfSync:1 FirmwareVersion:06.04.00.00
   index:2 active:0 Flexray:2 CAN:4 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:3 active:0 Flexray:1 CAN:6 LIN:0 MOST:0 FlexRaySelfSync:1 FirmwareVersion:06.05.00.00
   index:4 active:0 Flexray:4 CAN:0 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:5 active:0 Flexray:0 CAN:8 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:06.04.00.00
   index:6 active:0 Flexray:0 CAN:8 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:05.03.00.00
   index:7 active:0 Flexray:15 CAN:15 LIN:0 MOST:0 FlexRaySelfSync:0 FirmwareVersion:255.255.255.00
-> index:8 active:1 Flexray:1 CAN:6 LIN:0 MOST:0 FlexRaySelfSync:1 FirmwareVersion:06.05.00.00 <-
Enter index of an application image (1..8). 0 for abort: 6
Selected application image: 6

write.

Deleting firmware slot 6 - This operation could take a few minutes.
-
Firmware deletion of slot 6 completed.

Writing/deleting/activating further target slots on the FlexCard PMC II is possible without a computer shut down, but the changes will only take effect after a complete computer shutdown. (A restart is not sufficient.)